DRIVETRAIN
5K 1486cc ohv pushrod engine -NZDM solid lifter version
pod filter on km36 Liteace 5k intake pipe and carb
km36 exhaust manifold w/ 2tgeu secondaries
2" press bent exhaust straight thru
flexi joint, resonator and muffler at the rear
4K-J electronic distributor w/ internal igniter
AE82 electric radiator fan operated from temperature switch and relays + dash mounted over ride switch
KP61 K50 5-speed gearbox
AE85 struts, 9" solid disk, 4x114.3 stud
TE28 steering arms
Tokico AE92 GT gas shock fr
King Spring Lowering springs fr
2" lowering blocks
KE36 diff housing, redrilled ke2 axles to 4x114.3 stud
KP61 6" 3.3:1 ratio open diff head
Monroe shocks rear

INTERIOR
KE25 SR Coupe tacho woodgrain dash
MoMo TopPower yellow steering wheel
TRD leather look ball gearknob
'75 KE25 SR Coupe fr seats

EXTERIOR
'73-'74 ke26 non indicator fr corners
Wheels seen on this car....
13x6jj and 13x6.5jj Speedstar (unknown type), 185.60.13 tyres.
14x6.5jj & 14x7jj SSR Starshark, 175.60.14 tyres.
14x6.5jj & 14x7jj Watanabe, 175.65.14 tyres.
Club-K.co.nz sticker

PLANS
Engine
- Short term -
5K uprighted
Roadmark prototype upright K-T bellhousing (5K/T50)
22spline T50 + TA22 tail housing + short shifter
Rush autos TRD replica manifold stay, upright engine mounts and upright extractors
winged/baffled upright sump and modified oil pickup
Custom quad throttle upright intake manifold to suit efi bike carbs
Efi conversion using crank angle sensor + cam angle for sequential injection/ignition
Prototype timing chain cover with cam pulley inspection plate and crank angle sensor mount
Megasquirt v3 programmable ecu

- Long term -
4K-ZE (sc12, 7k-eu intake manif & Programmable ECU)
Uprighted engine (see 5k parts list)
T50 5-speed 22spline box + TA22 celica tail housing
Short shifter
6.7" ma45/te71/ae86 shortened disk brake diff, shortened/resplined axles
ST185 GT-Four Celica torsen LSD into live axle T302 3.7:1 diff head
Anti-tramp bars
Surge tank + efi fuel pump, lines and filter
2" lowering fr springs
AE86 fr vented disk and calipers
TE71 Levin brake bias valve
Camber plates
RCA's
All bushes replaced with urethane
14x8j rear wheels
Tints
LVV cert


back to KE26 page